Restore your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may require to reset your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the adjustments or are experiencing unexpected behavior. Fortunately, resetting your Holosun is a easy process that can be performed in just a few procedures.

• Begin by ensuring your red dot sight is powered on.
• Identify the small button for reset on the side of the device.
• Employ a small object to depress the reset lever for approximately 7 seconds.
• Let go the lever and your Holosun EPS Carry Red Dot sight will restart.
• The red dot sight should now be reverted to its factory settings.

Restore Your Holosun EPS Carry Red Dot back to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to start fresh, resetting it to its factory configuration is a breeze. First, find the tiny button on the rear of your optic. Then, keep pressed it for around ten seconds until you see the indicator light change. Your Holosun EPS Carry is now reverted to its factory settings, ready for precise aiming.

Bring Your Holosun EPS Carry Back to : Functionality

Is your beloved Holosun EPS Carry experiencing some performance problems? Don't despair! A simple factory reset can often resolve the problem and get your red dot sight back to its former glory. Before you begin, remember to detach the battery from your Holosun EPS Carry to prevent unexpected activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these straightforward steps:

• Simultaneously press and hold the power button for approximately 7 seconds.
• The display will flash, indicating that the reset is being performed.
• Let go of the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can connect the battery and test your sight's functionality. If you encounter any further troubles, don't hesitate to reach out to their technical assistance.

Revert Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Accomplish these steps carefully to ensure a successful factory reset.

• First, Activate your Holosun EPS Carry by pressing the power button.
• After that, press and hold both the mode button and the up/down adjustment button simultaneously.
• During continue holding these buttons, press the power button once.
• A message will show a confirmation prompt indicating that the reset process is initiated.
• Enable the process to complete. This may take a few moments. Once done, your Holosun EPS Carry will automatically deactivate.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Erase All Settings on Your Holosun EPS Carry

To Factory reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Turning a specific button combination. Consult your Instruction for the exact button sequence for your model. Once in the settings menu, look for an option that says "Clear Settings". Select this get more info option and confirm the reset. Your sight will then power off and restart with all settings Restored to their default values.

Reset your Holosun EPS Carry with a Factory Standard Settings

If your Holosun EPS Carry is acting erratically, a factory reset might be the answer. This will set back your sight to its original settings, clearing any altered configurations you've made. To execute this reset, observe these simple steps:

• To begin, locate the reset lever on your EPS Carry.
• Then, engage a fine object, like a toothpick, to depress the reset switch.
• While maintain the reset switch activated, power on your EPS Carry.
• You'll display a message showing that the reset is finished.

When the reset is complete, your EPS Carry will be back to its factory settings.

Report this wiki page